You can install your Android builds directly on your device.
Genymotion is a great quality Android simulator.
You can easily create virtual Android devices and preview on your computer.
Genymotion lets you run different versions of Android OS as well as different hardware (phones and tablets). To get it running, just follow these steps.
1: Download and Install VirtualBox if you are running the OS X version of Genymotion.
Using the EachScape Inspector with Genymotion:
To use the EachScape Inspector with an app running in the Genymotion emulator, you need to modify the network settings to make the virtual device use the same network as your computer.
Note: Make sure Genymotion is not running when you make the following modification.
Open VirtualBox and locate the virtual machine associated with your Genymotion Virtual Device. Select the device, and click Settings.
Click on the Network tab, then the Adapter 2 tab. In the Attached to: drop-down menu, select Bridged Adapter. Click OK. Close VirtualBox.
(Note: Make sure in the tab Adapter 1 the Attached to: drop-down menu, has Host-only Adapter selected).
Run Genymotion, open up the device you just modified, and navigate to the wifi settings. Make note of the IP address. Run an EachScape app in the virtual device and then, from your computer, open your browser and navigate to the http://<IP address>:8080 where <IP address> is the address you made note of in the WiFi settings.
- Preview iOS app using XCode simulator